Double-X Jacks Stand Kid is for a Car Rescue in flood, weight capacity 4400 lbs, lifting heigh 768mm (30 inch）

Double-X Jacks Stand Kid  is for a car rescue by yourself quickly in flood


We are making the Double-X Jacks Stand to lift the car in flood water. The jack stand is portable and storage in back of car.
 
The 4 car lift jacks can hold up car to 4400 lbs/2.0 tons with 768mm height. Easy to Operate: Lift your car with revisable wrenth. All it takes is a spin of the detachable metal handle to raise the jack effortlessly. The maximun lifting height is 30"/768mm.


The car is in balance and stable on 4 jacks. There is 50x23cm top platform provides a large contact area. And 4 jacks covered 0.46 square meter area to make suce the car is in balance. Fold the car lift to a 130mm height for compact storage and transport in car. The powder-coated finish resists oil, grease, and rust, making it easy to clean and store in your garage or car, or towing trucker.
 
New Logo                                             Lift the wheel off ground


Specifications:


Package Size:     500x230x130mm

Package weight: 44kg (11kg/Jack x 4)

Weight capacity:  2000kg(4400lbs)

Optimal Height:   768mm （30”)

Material:              Steel

Brand:                 Double-X Jacks

Model:                DJ-130-768

Color:                  Orange

Kid:   4 Double Jacks, 1 pieces of wheel wrench, 4 Rubble Saddles

There are 4 Double Jacks  to lift a vehicle by wheel wrench.

We can quick set up, connect and lift the car up to 76cm when your car is stalled (the water level is about 25cm). The car is safe and stable on jacks.

Example of water level for car float:

A small car like a Toyota Yaris, weighing 1.05 tonnes, was moved by water only 15 cm deep and with a flow speed of just 3.6 km/h. It completely floats away in 60 cm of water. Even a 2.5 tonne Nissan Patrol 4WD can be rendered unstable by floodwater 45cm high, and a similar flow speed. Once the water reaches 95 cm, the four-wheel drive can completely float, and needs almost zero force to move it by hand.

The jack stand is used on car driving road or packing lot with hard flate surface. Read the operation instruction guide before use.

How to Lift the car

Jack stands are safe when used according to specifications (weight limits and so on) and positioned at factory-recommended jacking points. However, there are precautions.

  • Only use jack stands on a level surface.
  • Place them at exactly the carmaker’s stated jacking points.
  • When placing the stands, raise one side of the car first and then the other side. Don’t raise the front and then the rear or vice versa. 
  • While jacking up the vehicle, chock the wheels in contact with the floor.
  • No one under the car when the vehicle is on jacks.

Testing: Lifted  a car wheel off ground on June 13, 2025.  

Progress: We are going to use a ball screw instead of the T-screw in order to reduce the force to lift the car. The project will be completed in 2026.

www.Double-X-Jacks.com